CHANGE JBOD MODE ON LSI CONTROLLER

PROBLEM:

DRIVES ARE NOT SHOWING AS JBOD ONLY AS ONLINE GOOD IN MY WINDOWS SYSTEM

SOLUTION:

USE STORCLI TO CHANGE THE DEFAULT CONTROLLER MODE

IN COMMAND PROMPT (ADMINISTRATOR) FROM C:\PROGRAM FILES(X86)\MEGARAID STORAGE MANAGER DO:

storcli (or storcli64) /c0 set jbod=on

FROM THIS POINT ON, ANY NEW DRIVE CONNECTED TO THE CONTROLLER WILL BE INSTANTLY AVAILABLE TO THE OS

IF STORCLI IS NOT INSTALLED, DOWNLOAD FROM:

https://docs.broadcom.com/docs/007.1907.0000.0000_Unified_StorCLI.zip